CYP uses cookies and similar technologies to perform essential online functions, analyze online activities, provide advertising services and other functions. For detailed information, please visit “Terms of use & Privacy Policy”.
4K60 2x1 HDMI/USB-C to HDMI AV over IP Receiver with Dante
This Receiver is designed for high-quality, IP-routable AV extension up to 4K@60 4:4:4 with minimum latency and integrated Dante technology which extends and routes audio across standard Ethernet networks, including insertion and extraction. The use of 10-Gigabit Ethernet ports, and Cat.6A cable allows transmission of the video signal up to 100m. The unit can be powered directly via PoE when connected through Cat.6A to a 10-Gigabit Ethernet switch that supports PoE (802.3at), allowing for great installation flexibility. Multiple control and data signals may also be transmitted along with the audio and video, including IR, RS-232, USB 2.0, and Ethernet. Advanced HDMI content such as HDR (High Dynamic Range), 10-bit color and multi-channel HD Bitstream audio can be transmitted in pass-through mode. Dante output port can transmit any audio source available from this unit, while input port can insert Dante audio to any audio outputs. It also supports AES67 and Audinate Dante Controller. When combined with the optional IP Master Controller or control software, the functionality of the receiver expands exponentially. Multiple transmitters and receivers can be combined with one or more 10-Gigabit Ethernet switches, allowing the units to form a distributed video matrix, a multiviewer system, or a video wall system adding to their flexibility in large event installations. Additionally, the specially engineered source preview functionality added to this hardware platform increases its utility when controlled remotely. The integrated USB hub of each transmitter can function as a simple point to point KVM extension or freely routed between any two endpoints. This type of USB KVM routing flexibility enables a wide range of multi-user, control room, or on-demand installation scenarios. The built-in EDID and HDCP management functionality enables the unit to fit into every situation. Basic configuration of the unit can be achieved via front panel buttons with an OSD (On-Screen Display). Advanced control such as firmware update can also be performed conveniently through the optional IP Master Controller or control software.