CYP uses cookies and similar technologies to perform essential online functions, analyze online activities, provide advertising services and other functions. For detailed information, please visit “Terms of use & Privacy Policy”.
Dante Wallplate Transceiver with Microphone
This wall plate integrates Dante® technology (digital audio network via Ethernet), a high-quality microphone, and a line output into a transceiver. Every Transceiver is capable of simultaneous bi-directional audio extension via Cat.5e/6/7 cable over distances up to 100 meters, enhancing the flexibility of any installation. Thanks to the integrated support for Dante/AES67 technology which extends and routes audio across standard Ethernet networks, this unit forms an important part of an easier and more flexible system for managing large audio systems than traditional point-to-point physical wiring. Dante does away with the bundles of heavy, expensive, multi-core analog audio cables and replaces it with low cost, and easy to manage, Cat.5e/6/7 cables while maintaining the high quality expected from uncompressed digital audio. Due to the nature of packet-based Ethernet data transmission, there is no need to worry about the traditional enemies of long distance audio extension, such as analog signal interference, crosstalk, or signal attenuation. All of this is provided with the absolute minimum of latency (typically around 1ms). The unit is powered directly by PoE (Power over Ethernet) which allows for increased installation location flexibility. Basic device configuration is provided by serial while routing and network configuration management is provided via 3rd party control software.
AIP-D4101- 4 Balanced In, Analog Audio to Dante; AIP-D1401- 4 Balanced Out, Dante to Analog Audio
This transmitter and receiver pair are with Dante Technology and supports AES67. Because with Dante technology, it is obviously easier and more flexible than physically wiring. Dante does away with bundles of heavy expensive analog or multi-cores cables, replacing it with low cost easy available Cat. 5e or Cat. 6 cables. High quality audio is another benefit of Dante. Because it is a digital transmission method, you do not need to worry about interference and crosstalk, and worry about signal attenuation caused by constant distance transmission. These units provide flexibility for installation. Equipped with four audio inputs/outputs and one Dante port, they could transfer audio and route them easily with 3rd party units via the Dante network. On the ADC, adjustable phantom power (5v or 48v) for each port supports for microphones, and auxiliaries.
UHD+ Audio Extractor & Inserter
This Audio Extractor & Inserter can extract audio from a HDMI source, an optical source, or an analog source. It allows the user to convert high quality audio into HDMI, analog or optical signals for use with powered speakers or different signal AV receivers. Both HDMI input and output ports support resolutions up to 4K@60Hz (4:4:4, 8-bit) and are capable of providing high quality audio and video performance, which enable the user to pass through HDMI video source to two HDMI outputs. Built-in EDID management allows the user selecting from multiple EDIDs and editing an user provided EDID.
4K60 HDMI over IP Receiver with USB 2.0
This unit supports both Unicast and Multicast modes, enabling video wall and seamless collaboration across multiple windows in Multicast mode. It supports the transmission of Ultra High-Definition signals (up to 4K@60Hz RGB) with audio and USB 2.0 up to 100m on a single cable which allows connection of USB flash drives, keyboard, and mouse. The transmission distance can be further extended (up to 100m per segment) by using gigabit network switches, allowing the user to cascade the system without signal loss or introducing delay. Moreover, it supports IP to IR and IP to RS-232, converting the IP signal into IR and RS-232 commands for device control.